Automotive glass products, Parts, Glazing, Tools & Equipment   

	Home » All Products   1 of 2 *DISCONTINUED* Extractor 28V Kit This product has been discontinued from the manufacturer Price: $0.01 *Discontinued* Extractor Pneumatic Shaft 8" This product has been discontinued from the manufacturer Price: $0.01 1" UltraWiz Cold Knife Blades - 10 PN1002 has a 1" long cutting area. This is the most popular blade because on most vehicles it will cut the urethane with one cut. Original Thickness. Package of ten. Price: $28.00 1" UltraWiz Cold Knife UltraThin Blades - 10 PN5002 is a 1" UltraThin cold knife blade and the most common size used by technicians. They are 40% thinner than the regular UltraWiz blades. Package of ten. Price: $42.00 1/2" Pinchweld Preparation Tool Used to remove urethane and butyl from the pinchweld. Made with a hardened steel blade and long shank to keep your hands away from pieces of broken glass. 6-1/2" Long. Price: $11.00 1/2" Pinchweld Preparation Tool Use to remove urethane and butyl from a pinchweld. Made with a hardened steel blade and long shank to keep your hands away from pieces of broken glass. 4" Long. Price: $8.00 1/2" SuperScraper Blades - 10 Replacement SuperScraper and PrepMaster Blades made of surgically sharp, stainless steel. Also available in two additional widths: 5/8", and 3/4". Package of ten. Price: $6.00 1 of 2 1/2" Wool Daubers - 100 Many vehicles have very small pinchwelds and conventional daubers are too large. A large dauber may cause urethane to spread onto the headliner or worse, drip onto the seat. This is the reason why we offer these small daubers, measuring only 1/2" in diameter. Made of a thick wool tuft that is held tightly in the center with a strong wire that extends back 4-1/4" and forms a circular grip for easy gripping. 1/2" diameter and approximately 6" length. Price: $10.00 1 of 2 1/2" Wool Daubers - 1000 Many vehicles have very small pinchwelds and conventional daubers are too large. A large dauber may cause urethane to spread onto the headliner or worse, drip onto the seat. This is the reason why we offer these small daubers, measuring only 1/2" in diameter. Made of a thick wool tuft that is held tightly in the center with a strong wire that extends back 4-1/4" and forms a circular grip for easy gripping. 1/2" in diameter and about 6" length. Package of 1000. Price: $89.00 1-1/2" Pinchweld Preparation Tool Used to remove urethane and butyl from the pinchweld. Made with a hardened steel blade and long shank to keep your hands away from pieces of broken glass. 7" Long. Price: $12.00 1-1/2" UltraWiz Cold Knife Blades - 10 PN1004 has a cutting area that is 1-1/2" long. We do not recommend using this blade for initial cuts. Use a shorter blade to make your first cut, then go back with this blade to make your final cut. Especially useful where urethane is very wide, such as corners and along the bottom. Original Thickness. Package of ten. Price: $40.00 1-1/2" UltraWiz Cold Knife UltraThin Blades - 10 PN5004 is a 1-1/2" blade and should never be used for the first cut. Always use a shorter blade to make the first cut then finish cutting through the urethane with this long blade. Package of ten. Price: $50.00 1-1/4" UltraWiz Cold Knife Blades - 10 PN1003 1-1/4" original thickness blades are designed with an extra space between the blade and the pull handle bolt. This extra space gives you greater clearance when the glass has a bonded molding. Original Thickness. Package of ten. Price: $40.00 1-1/4" UltraWiz Cold Knife UltraThin Blades - 10 PN5003 is a 1 1/4" UltraThin cold knife blade. They are 40% thinner than the regular UltraWiz blades. Package of ten. Price: $47.00 14" PipeKnife BD79 Cool Tool PipeKnife is 14" long and has a 6-1/2" flattened blade shaft with rounded corners. The PipeKnife is made of cast aluminum but has a steel nut cast into the back side to receive the screw and prevent stripping of the threads. Take out the rear plug and you can put a pipe in the handle to extend its length. The PipeKnife can use all standard utility knife blades including our ULB582 and DD1086 Extra-Long Utility Knife Blades. Blades not included. MADE IN USA Price: $23.00 1 of 2 18" Telescopic Cutting Knife #ALK230 This knife adjusts from its shortest length of 18� long and extends up to 24" in length. Features extra blade storage area under the blade holder. Comes with one standard utility knife blade. Price: $32.00 1829-PMS-19 The Pro Stealth Seamer, Manual is the key to completing a "seamless" installation. It joins, levels, and actually flattens warped stone to help you consistently produce virtually invisible seams. Price: $495.00 2 in 1 Window Tool 2-in-1 window tool Please contact us for availability. Price: $0.01 3/4" SuperScraper Blades - 10 Replacement 5/8" SuperScraper blades. They are made of surgically sharp stainless steel. Also available in 1/2" and 5/8" wide. Package of ten Price: $6.00 3/4" UltraWiz Cold Knife Blades - 10 PN1001 has a cutting area that is 3/4" long. It is commonly used to cut standard-width urethane. Many technicians use this blade to make the first cut when cutting wide urethane. Original Thickness. Package of ten. Price: $28.00 3/4" UltraWiz Cold Knife UltraThin Blades - 10 PN5001 is a 3/4" UltraThin cold knife blade. They are 40% thinner than the regular UltraWiz blades. Package of ten. Price: $37.00 3/4" Wide Pinchweld Preparation Tool Used to remove urethane and butyl from the pinchweld. Made with a hardened steel blade and long shank to keep your hands away from pieces of broken glass. 4" Long. Price: $8.00 3/4" Wide Pinchweld Preparation Tool Used to remove urethane and butyl from the pinchweld. Made with a hardened steel blade and long shank to keep your hands away from pieces of broken glass. 6-1/2" Long. Price: $11.00 3/8" UltraWiz Cold Knife Blades - 10 PN1000 is intended for use as a starter blade. The cutting area is 3/8" long and is useful when starting your first cut on urethane that is wider than a regular blade. Original Thickness. Package of ten. Price: $28.00 « Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | Next »
	home | products | about us | search | links |checkout | contact us Copyright Policy  Privacy Policy Copyright © 2024 Western Glass Supply Inc, All rights reserved. Design and Hosting by SanbornWebDesigns