Automotive glass products, Parts, Glazing, Tools & Equipment   

	Home » All Products   Blue Masking Tape 2" Blue Tape 2" Price: $9.91 Blue Tape 3/4 -presently unavailable Blue Tape 3/4" X 50 YD. Presently Unavailable Price: $0.01 Bone 87-6364 Setting Tool Bone. Price: $3.34 BounceBACK 12" Pinchweld Protector MTF185 Replacement 12" pinchweld protector for the Equalizer BounceBACK Pinchweld Protection System. WARNING: This product contains a chemical known to the State of California to cause cancer. For more information go to P65Warnings Price: $3.00 BounceBACK 18" Pinchweld Protector MET184 Replacement 18" pinchweld protector for the Equalizer BounceBACK Pinchweld Protection System. WARNING: This product contains a chemical known to the State of California to cause cancer. For more information go to P65Warnings Price: $4.00 BounceBACK 24" Pinchweld Protector MTF183 Replacement 24" pinchweld protector for the Equalizer BounceBACK Pinchweld Protection System. WARNING: This product contains a chemical known to the State of California to cause cancer. For more information go to P65Warnings Price: $5.00 BounceBACK 48" Pinchweld Protector MLP182 Replacement 48" pinchweld protector for the Equalizer� BounceBACK Pinchweld Protection System. WARNING: This product contains a chemical known to the State of California to cause cancer. For more information go to P65Warnings Price: $10.00 BounceBACK Absorbing Tape MCT720A Impact absorbing tape for BounceBACK Pinchweld Protection System. 2" wide and 180" Long WARNING: This product contains a chemical known to the State of California to cause cancer. For more information go to P65Warnings Price: $25.00 1 of 2 BounceBACK Pinchweld Protection System MDP181 Protecting the pinchweld when removing the glass has always been a problem for technicians. When a protector was placed between the glass and pinchweld the repeated hits by a power tool blade would cause that protector to jump out of the pinchweld, leaving the paint exposed to potential harm and tape would work to some extent, but would not hold sufficient downward pressure to keep the pinchweld protector in place. Price: $51.00 Breakaway Blades for Olfa LB21 fits the Olfa XL2, Olfa OLF20, Olfa Silver (SVE802), and Olfa OH1. They will also fit all standard breakaway point knives. When the point of the LB21 breaks or dulls, simply snap off the segments and you have a new, sharp cutting tip. It is very useful for cutting urethane that is far below the dash of most automobiles. Package of ten. *​Call for pricing and availability* Price: $0.01 Breakaway Blades for Olfa Silver - 10 Stainless Steel blades for the Olfa Silver Knife (SVE802). Package of ten. *​Call for pricing and availability* Price: $0.01 Breakaway Point Blades - 5 Breakaway point blades for OH1 knife. Package of 5. *​Call for pricing and availability* Price: $0.01 1 of 3 BTB "Winged" Anti-Scratch Pinchweld Preparation These blades are sharpened on the outside of the curve and help to avoid damage to paint when removing excess urethane after a windshield removal or removing urethane with shattered tempered glass fragments. Set Includes 3-"Winged" blades (1/2", 3/4" and 1"), one 1-9/16" wide prep blade, 1-WK7 handle, 1-hex key, and carry case. Price: $92.00 BTB Diamond Sharpening Stone The BTB Diamond Hone blade sharpening stone provides a keen and sharp edge on all of your BTB blades and other cutting blades. When sharpening BTB blades, sharpen the rounded side only. For any small burrs created on the flat side, give them a slight touch up only to remove the burr. Price: $17.00 1 of 3 BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation WK6NKIT The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim. Featuring winged edges to prevent scratching and damage to the paint and body. An easily sharpened, sturdy design made to last. Stored in a roll-up, canvas bag. Set Includes 3-Narrow "Winged" blades (1/2", 3/4" and 1"), one 1-9/16" wide prep blade, 1-WK7 handle,1-hex key, and carry case. Price: $92.00 1 of 2 BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade - 1" Wide The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim. Price: $19.00 1 of 2 BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade - 1-9/16" Wide The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim. Price: $16.00 1 of 2 BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade - 3/4" Wide The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim. Price: $19.00 1 of 2 BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade - 9/16" Wide The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim. Price: $19.00 Bullet Blade 1-1/2" W x 12" L REL261 Bullet Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze. Price: $54.00 Bullet Blade 3" W x 10" REB262 Bullet Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze. Price: $54.00 Bullet Blade 3" W x 14" L REE264 Bullet Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze. WARNING: This product contains a chemical known to the State of California to cause cancer. For more information go to P65Warnings Price: $54.00 Bullet Blade 3" W x 12" L REL263 Bullet Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze. Price: $54.00 Caulk tip Yellow Cone Tip Yellow Plastic to be used with Sausage Guns pkg of 3 Price: $4.46 « Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | Next »
	home | products | about us | search | links |checkout | contact us Copyright Policy  Privacy Policy Copyright © 2024 Western Glass Supply Inc, All rights reserved. Design and Hosting by SanbornWebDesigns