Automotive glass products, Parts, Glazing, Tools & Equipment   

	Home » All Products   Patio Door KDK38X96CL Mill 38" X 96" Legacy Door Kit Price: $0.01 Patio Door KDK38X96WH White 38" X 96" Legacy Door Kit Price: $0.01 Patio Door KDK50X81BRZ Bronze 50" X 81" Legacy Door Kit Price: $0.01 Patio Door KDK50X81CL Mill 50" X 81" Legacy Door Kit Price: $0.01 Patio Door KDK50X81WH White 50" X 81" Legacy Door Kit Price: $0.01 PCAT2-14 The Pro-Cart AT2 is designed to overcome the challenges of moving stone over curbs, stairs, and other rough terrain such as gravel or lawns. The cart easily and safely transports very large and cumbersome stone, reducing the physical burden on workers. Price: $1,450.00 PDHD2 The Pro-Dolly HD2 allows easier transport and installation of materials. An aluminum frame makes this dolly extremely compact and lightweight, only 35 pounds, yet strong enough to accommodate 1000 lbs. Price: $850.00 Pencil WGS1 Yellow Glass Marking Pencil Price: $0.97 Pet Screen PSC36 Charcoal 36" X 100' Charcoal Pet Screen Price: $203.30 Pet Screen PSC48 Charcoal 48" X 100' Charcoal Pet Screen Price: $247.90 Pet Screen PSG36 Gray 36" X 100' Gray Pet Screen Price: $203.26 Pet Screen PSG48 Gray 48" X 100' Gray Pet Screen Price: $247.90 Pin Removing Pliers PRT-305 Pin Removing Pliers Price: $74.00 Pinchweld Cleaner It is important during every windshield replacement to clean the pinchweld in order for the urethane to adhere properly. Whisk brooms were used in the past for cleaning the pinchweld but with todays vehicle paint jobs being up to seven layers thick with a clear coat, the stiff straws would scratch the surrounding painted surfaces. Instead, now days you'll see technicians using paint brushes for this task. We wouldn't recommend using just any paint brush though because many of them still have bristles that are stiff enough to damage the clear coat. Our Pinchweld Cleaner brush was designed specifically with this job in mind. It is a paint brush made with soft crushed bristles for contact with the paint, but enough stiffness in each individual bristle to remove the dust and dirt out of the pinchweld. Price: $12.00 1 of 2 Pinchweld Cleaning Brushes Sometimes it is necessary to prime a pinchweld and you will need a small yet inexpensive & high-quality brush. Our Pinchweld Cleaning Brushes are made of horsehair, and have the stiffness needed to spread the primer properly, but are soft enough to spread the primer properly. Made with a thin, metal handle that is 6" long and 5/16" in diameter. Price: $24.00 Pinchweld Cleaning Brushes - 10 Pinchwelds are perfect places for dirt, dust, and grime to collect. To prevent contamination of the urethane, before you strip it down to 2 mm, you must clean the area between the pinchweld and the urethane so dust and dirt will not fall onto, and contaminate, the freshly trimmed urethane. We recommend using plain water to loosen the dirt, dust, and grime. Most brushes are too large to get down into this small area and have bristles that are too stiff and can scratch the paint on the outside of the pinchweld. Our brushes are made of horsehair. They have the stiffness needed to brush away the grime but are soft enough to keep from damaging the paint or pinchweld. Brushes are made with a thin, metal handle that is 6" long and 5/16" in diameter. Price: $5.00 Pinchweld Preparation Blade This 3/4" wide replacement blade works with Pinchweld Preparation Tool (SB531) but it also works great with an old cold knife. Price: $20.00 1 of 2 Piranha Blade 3"W x 10"L PHB169 The Equalizer Piranha blade uses the same cutting technology as the original HydroBlade but also incorporates serration on a portion of each side of the blade, making a cutting action from left to right and right to left much easier. Price: $59.00 1 of 2 Piranha Blade 3"W x 12"L PHB174 The Equalizer Piranha blade uses the same cutting technology as the original HydroBlade but also incorporates serration on a portion of each side of the blade, making a cutting action from left to right and right to left much easier. Price: $59.00 1 of 2 Piranha Blade 3"W x 14"L PHB175 The Equalizer Piranha blade uses the same cutting technology as the original HydroBlade but also incorporates serration on a portion of each side of the blade, making a cutting action from left to right and right to left much easier. Price: $59.00 1 of 2 Pistol Grip Centerstart FG1129 Pistol Grip Centerstart features an ergonomic handle and a hole designed to accept both cord and wire. WARNING: This product contains a chemical known to the State of California to cause cancer. For more information go to P65Warnings Price: $18.00 Pivot Head Pipeknife 14 Pivot Head 14″ inch Aluminum Flat Handle Sealant Cutout Knife Price: $39.00 Pivot Head Pipeknife 18 Pivot Head 18″ inch Aluminum Flat Handle Sealant Cutout Knife Price: $43.00 Plastic Cutter 05-111 Score Mate Plastic Cutter Price: $8.29 « Previous | ...20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30... | Next »
	home | products | about us | search | links |checkout | contact us Copyright Policy  Privacy Policy Copyright © 2024 Western Glass Supply Inc, All rights reserved. Design and Hosting by SanbornWebDesigns